Hydraulic
press systems for Compression Molding of Composite Products - 4
post, slab side, and/or window frame design presses for multiple applications.
25 Tons to 2000 Ton capacity. Standard platen sizes 24" x 24"
to 48" x 96" or customized to meet your requirements. Single or
multiple openings available.
|
Vacuum
Press Systems – ensure the efficient removal of entrapped air
and volatiles by integrating the OEM Vacuum Press into your production system.
With a welded vacuum chamber to ensure leak-free vacuum processing the OEM
press offers vacuum lamination combined with accurate hydraulic pressure
control. Full evacuation of the vacuum chamber can be achieved within seven
to ten (7-10) minutes, vacuum levels can be monitored via a vacuum guage,
and via a vacuum transducer with the information automatically forwarded
to a computer control screen.
|
Multilayer
Printed Circuits Boards and Flexible Circuit Vacuum Lamination Press Systems
– for perfect lamination of MLBs with reliable and precise process
control the OEM vacuum lamination press system is recognized as an industry
leader. Our exclusive Vac-Q-Lam Quad Piston press provides unsurpassed pressure
uniformity across the platen surface.
|
Vacuum
lamination for the manufacture of Copper Clad Laminates – OEM
Press Systems manufactures large format platen size vacuum enclosed presses
with multiple openings for the manufacture of full sheet and half sheet
laminate materials. OEM’s exclusive press design offers perfect lamination
of copper clad laminates. With multiple daylight openings, our low profile
press is an ideal solution for a quick, efficient and economical installation.
OEM also offers a full line of press loading and unloading solutions as
well as integrated Lay-up and Break-down Stations.
|
Rubber
Molding Presses – increase your productivity by reducing cycle
times, increase your product quality by eliminating entrapped air, utilize
OEM’s degas cycle controls to automatically incorporate bump cycles
into the molding process. Multiple press, standard and custom design, available
to meet your requirements.
|
Composite
Molding Presses – Hydraulic Presses For Thermoplastics, Thermosets
and Composite Molding applications. 5 to 1500 Ton capacity. Single and multiple
openings. Four Post, Slab & Window Frame Construction presses available.
Presses are designed with Thermal Fluid, Electric or Steam heated &
cooled Platens, or without for applications using heated molds. Manual or
automatic controls.
|
Laboratory
Presses - 10 Ton to 150 Ton Laboratory Presses, with or without
vacuum, for Research and Development applications. The OEM Lab press offers
all the capabilities of a production press in a development environment,
through even pressure application, accurate temperature control and precise
and repeatable process control. Data gathering capabilities for comprehensive
analysis of your results. The "OEM Advantage" controls programme
provides fully automatic ten (10) segment recipe control for accurate cycle
management. Temperature capability up to 1000°F.
|
Plastic
Card Lamination Presses – OEM offers Single Stack and Twin
Stack Lamination Press systems for the manufacture of contact, contactless
and dual interface cards. OEM’s innovative in-line twin stack lamination
system offers uninterrupted smooth operation and high production. Our Quad
Piston press design enables us to offer a twelve (12) opening laminator
with a low profile first platen height of 28" (711mm) from floor level
and a top platen height of 96" (2438mm) from floor level making the
press openings easy to access for maintenance purposes. OEM offers several
innovative press loading and unloading system that increase the efficiencies
and productivity of your lamination system.
|
Lamination
Presses - for multiple applications, heated platens utilizing
electric heat, steam heating or thermal fluid heating. Platen cooling
capability can be provided for complete processing in one press. Vacuum
lamination can be incorporated for higher yields and improved product
quality.
|
High
Temperature Presses – process your exotic materials at high
temperature with the OEM Press System. Presses with maximum operating temperature
capabilities of 1000°F are available utilizing electric heating, and
750°F utilizing thermal fluid heating. In-factory lamination services
are available up to 1000°F.
|
Wood
Processing Press Systems – MDF, Particleboard, Plywood, Bamboo
and OSB Production Press Lines incorporating hydraulic press and material
handling systems are available through OEM Press Systems. In addition, together
with our strategic partners, we can offer supplementary equipment such as
chip preparation, fiber preparation, mat forming, cooling, trimming and
sanding equipment to integrate with the press system to provide a complete
production and finishing system.
|
Previously
Owned Presses – Enjoy the advantages of previously owned equipment
with an excellent reputation, and the assurance of a factory warranty from
OEM Press Systems. We offer a wide range of previously owned vacuum and
non-vacuum press systems for the manufacture of PCBs, Flex Circuits, Composites
and Rubber Products. View our current selection of equipment or call us
today with your specific requirement.
|
Hydraulic
Press Rebuilds – Skilled technicians at OEM’s facility
will rebuild your hydraulic press to "as good as new" condition.
All wear and tear components will be new to ensure years of reliable service
from the press. We can supply the hydraulic and controls system or integrate
with your existing system as required.
|
Platens
– Platens designed and manufactured to suit every application. All
heating and cooling methods can be accommodated, including electric, steam,
or thermal fluid heating.
|
Complete
Electrical Control Systems – From Push Button Controls, to
Microprocessor Controls, to Fully Automated Controls with Bar-code Tracking
Systems OEM’s Controls Engineers can design engineer and build a controls
system that meets your requirements for reliable, repeatable, and precise
process control.
|
Worldwide
Service And Support – OEM has a team of factory trained, highly
experienced, Field Service Technicians who are capable of responding immediately
in meeting your service needs.
|
Spare
Parts – OEM maintains a stock of inventory spare parts at our
facility in order to respond immediately to your request for critical spare
parts. Same day shipment of inventory spare parts is a standard service
at OEM Press Systems. Counter-to-counter and courier services may also be
provided.
|
|
