Compression Molding Hydraulic Presses #1020 — 2,000 Ton Hydraulic Press, 50" LR x 120" FB bed area, 50" Daylight, 40" Stroke, Up-acting design, Dual 24" Rams operating at 5000 psi Click here to download Spec Page for the item above! #1032 - 1,500 Ton Hydraulic Press, 44" LR x 54" FB bed area, 63" Daylight, 30" Stroke, 34" Ram, Suitable for 1 to 10 daylight openings #1022 — 1,000 Ton Hydraulic Press, 50" LR x 50" FB bed area, 50" Daylight, 40" Stroke, 24" Ram, Two (2) presses available #1023 — 800 Ton Hydraulic Press, 45" LR x 54" FB bed area, 40" Daylight, 30" Stroke, Up-acting design, 26" Ram #1024 — 750 Ton Adamson, 36" LR x 32" FB bed area, 32" Daylight, 18" Stroke, Up-acting design, Fast Close / Open action — Two (2) presses available #1033 - 750 Ton Adamson, 40" LR x 52" FB bed area, 50" Daylight, 18" Stroke, Suitable for six (6) to ten (10) daylight openings of 3" - 4" each #1025 — 150 Ton Hydraulic Press, 4 post, 38" x 24" bed area, 20" Daylight, Up-acting press design with 44" loading height #1026 - 100 Ton Wemhoner, Slab side, 40" LR x 60" FB bed area, 24" Daylight #1153 — 100 Ton Hydraulic Press, 4 post, 22" LR x 24" FB, 5 _" Daylight with two (2) platens designed for steam heating #1036 — 100 Ton Hydraulic Press, Down-acting design 89" LR x 36" FB between posts, 42" Daylight with 16" stroke #1028 - 75 Ton Press, 20" LR x 20" FB bed area, 12" Daylight #1029 - 50 Ton Hydraulic Press, 4-post, 12" LR x 12" FB, 16" daylight, Five (5) presses available #1037 — 40 Ton Hydraulic Press, 18" x 18" platen size, One daylight opening with 6" daylight, Electrically heated platens with cooling Compression Molding Transfer Presses #1027 — 200 Ton, 4 Post, 26" LR x 18" FB, 50 Ton Transfer cylinder, Horizontal or Vertical, Rubber / Plastic transfer molding press, Four (4) presses available Laminating Presses (Conventional) #1021 — 1,200 Tons, Fjellman, 100" LR x 50" FB platen, Five (5) Steam / Hot Oil Heated Platens, 60" Daylight with 32" stroke, Floor Standing, Up-acting design Daylights and platen size can be altered to suit custom application Click here to download Spec Page for the item above! Vacuum Lamination Presses #12105 – 125 Ton OEM Vacuum Hot Press with Cool Press and Loader/Unloader Four (4) Openings 26” x 36” platen size Platens are electrically heated with internal platen cooling Self-contained skid mounted hydraulics and vacuum unit Electrical controls designed for easy recipe programming. Suitable for operation up to 525°F. Available “As Is”, or Fully tested and inspected or Rebuilt to “as new” condition with full factory warranty #0928 – 150 Ton Vacuum Hot Press system Six (6) daylight opening Hot Press 18”x18” platen size Thermal fluid heated with internal platen cooling Self-contained electric thermal fluid heating system Available with integrated Cold Press, fully automated press loading and unloading system Ancillary equipment includes Depinner Unit, Break-down Station and Lay-up Stations Suitable for operation up to 800°F with optional high temperature upgrade Computer based controls system Like NEW! #0929 – 150 Ton Hot Press (non-vacuum) with Cool Press Four (4) Openings each with 4” of daylight 29.5”x29.5” (750mm x 750mm) platen size Platens are electrically heated Suitable for operation up to 480°F Microprocessor based controls system for pre-programmed recipe cycle control Cool Press, 15 Tons, Four (4) openings with water cooled platens Vacuum frames available Available “As Is”, or Fully tested and Inspected #12205 – 60 Ton Vacuum Hot Press Four (4) Openings 18”x24” platen size Platens are electrically heated with water cooling Suitable for operation up to 450°F Microprocessor based controls system for pre-programmed recipe cycle control Available “As Is”, or Fully tested and Inspected #0298 – 300 Ton OEM Vac-Q-Lam Hot Press system Twelve (12) daylight openings 30.5” x 50” platen size Hot Press platens are designed for thermal fluid heating and cooling offering the most precise process control available Suitable for operation up to 525°F with high temperature upgrades available for operation up to 660°F Integrated Cool Press and Loader/Unloader also available Like NEW! Full factory warranty! #0185 – 880 Ton OEM Vac-Q-Lam Hot Press system Fifteen (15) daylight openings 52” x 58” platen size Hot Press platens are designed for thermal fluid heating and cooling offering the most precise process control available Suitable for operation up to 450° Integrated Cool Press and Loader/Unloader also available Integrated Storage Accumulators for maximum productivity, throughput and efficiency As is or fully refurbished! Factory warranty available! ALL PRESSES ARE SUBJECT TO AVAILABILITY PRESSES ARE AVAILABLE "AS IS, WHERE IS" OR FULLY REFURBISHED WITH FACTORY WARRANTY

Corporate Information

Contact OEM Press Systems, Inc.
OEM Press Systems, Inc. – Corporate Office
311 S. Highland St.
Fullerton, CA 92832
Ph: (714) 449 7500
Fx: (714) 449 7510
Toll Free: (866) 636 7978

OEM Press Systems, Inc. – Shanghai Office
Suite 802, Building 7, 888 Chang Ning Road, Shanghai 200051,
China.
New Ph: + 86 (21) 5241 0600
New Fax: + 86 (21) 5241 4851